Step 6: Diet Compositions & Feeding Schedule
Define what the pig eats, when diets change, and how much feed is offered each week.
This is the most detailed input screen in the model and the one most relevant to your daily work as a nutritionist. It has three sections: Feed Phases (diet compositions), Transition Rules, and the Feeding Schedule. Together, these define the complete nutritional program from barn entry to slaughter.
The three most impactful nutritional values
Net Energy, SID Lysine, and the fibre fractions (iCHO + fCHO) are the values that matter most. Net energy determines how much energy is available for growth. SID lysine determines the maximum possible lean growth. And the fibre fractions determine how much the pig can physically eat. If you only have time to verify three numbers, verify these.
Section 1: Feed Phases (Diet Compositions)
You can define up to 4 feed phases (e.g., Starter, Grower, Finisher 1, Finisher 2). Each phase represents a complete diet with its own nutrient composition, price, and feed form. The number of phases you use depends on your feeding program — a simple two-phase program is common, but more phases allow you to match nutrient supply more closely to the pig's changing requirements as it grows.
Phase Name
A free-text label for the phase (e.g., "Starter", "Phase 1", "Grower 28-50 kg"). This label appears in charts, tables, and reports, so choose something descriptive enough to identify the diet at a glance.
Feed Form
The physical form of the feed. Feed form affects two things: spillage (wasted feed that the pig does not consume but you still pay for) and bulk density (which influences how much the pig can physically eat).
The energy available to the pig after digestion losses, urinary losses, and heat increment have been subtracted. This is the most important nutritional value in the model. Net energy drives the feed intake calculations, energy partitioning between maintenance and growth, and ultimately determines how much protein and fat the pig deposits each day. A higher net energy diet means more energy is available per kilogram of feed consumed, which generally supports faster growth — but if energy exceeds the pig's protein deposition capacity, the surplus is deposited as fat.
SID Lysine
Standardized Ileal Digestible lysine — the first-limiting amino acid for lean growth in pigs. The model uses SID lysine to calculate the lysine-limited maximum protein deposition. If lysine supply is insufficient relative to the pig's genetic potential, protein deposition (and therefore lean growth) will be limited even if energy is adequate. In practice, this means an undersupply of lysine causes the pig to deposit more fat and less lean tissue than its genetics would allow.
Crude Protein
Total crude protein content of the diet. This value is used for nitrogen efficiency calculations in the sustainability report (nitrogen intake vs nitrogen retention). It does not affect the growth simulation itself — the model uses SID lysine, not crude protein, to determine amino acid supply.
Total Phosphorus
Total phosphorus in the diet (not just the digestible fraction). Used for phosphorus efficiency calculations in the sustainability report (total P intake vs P retention). Like crude protein, this value does not affect the growth simulation — the model uses internal calculations for phosphorus requirements during growth.
Insoluble Carbohydrates (iCHO)
The insoluble fibre fraction of the diet. Together with fCHO, this determines the bulk density of the diet and consequently the pig's maximum voluntary feed intake. Higher iCHO means a bulkier diet that fills the gut faster. This can limit intake in younger, smaller pigs whose gut capacity is the binding constraint on how much they can eat. iCHO has a stronger bulking effect than fCHO per gram.
Fermentable Carbohydrates (fCHO)
The fermentable fibre fraction. Also contributes to bulk density, though less than iCHO per gram. Together with iCHO, the model derives a crude fibre estimate that is used in the feed intake capacity calculations. When formulating diets with high by-product inclusion (e.g., beet pulp, wheat bran), pay particular attention to the combined iCHO and fCHO values, as these diets can be significantly bulkier than standard grain-soy formulations.
Carbon Footprint
| Property | Value |
|---|---|
| Unit | g CO2e per kg feed |
| Typical range | 1000 – 1500 g CO2e/kg for standard compound feeds |
The lifecycle greenhouse gas emissions associated with producing this feed, expressed as grams of CO2-equivalent per kilogram. This includes emissions from raw material production, processing, and transport. Set this value for each phase to see sustainability metrics (total carbon footprint per kg of live weight gain) in the sustainability report. If you leave it at 0, the carbon footprint section of the report will show zero emissions from feed.
Sustainability metrics require Crude Protein and Total Phosphorus
If you leave Crude Protein and Total Phosphorus at 0, the sustainability report will show 0% nitrogen and phosphorus efficiency. These values default to 0 because they are not needed for growth modelling, but you must enter them if you want meaningful sustainability metrics. You can find both values on your feed specification sheet or in your formulation software output.
Section 2: Transition Rules
For each pair of consecutive feed phases, you define when the model switches from one diet to the next. These rules control both the trigger for the switch and the speed of the transition.
Transition Type
| Type | Trigger | Description |
|---|---|---|
| Weight-based | Pig reaches a target live weight (e.g., 45 kg) | The most common and practical approach. The transition begins when the simulated pig reaches the specified body weight. This mirrors commercial practice where pigs are weighed (or estimated) and sorted into feeding groups. Weight-based transitions automatically account for differences in growth rate between scenarios: a faster-growing pig will reach the transition weight sooner. |
| Age-based | Simulation reaches a specific day number (e.g., day 40) | The transition begins on a fixed day of the simulation, regardless of the pig's weight at that point. Simpler to implement but does not account for variation in growth rates. A slow-growing pig may be lighter than expected when the transition occurs, potentially receiving a diet that is not well matched to its body weight. |
| Quantity-based | Pig has consumed a specific amount of feed in the current phase (e.g., 10 kg) | The transition occurs after the pig has eaten a set quantity of the current diet. This approach always switches immediately (no gradual transition). It can be useful when you purchase a fixed amount of starter feed per pig and want to switch to the next diet once that allocation is consumed. |
Choosing a transition type
Weight-based transitions are the most realistic for commercial operations where pigs are weighed and sorted. Age-based transitions are simpler to implement but may not account for variation in growth rates between batches. Quantity-based transitions are useful when feed is pre-allocated per pig.
Transition Days
| Property | Value |
|---|---|
| Range | 0 – 21 days |
The number of days over which the old and new diets are gradually blended. This models the practical reality of gradually mixing two feeds in the bin or feeder to avoid digestive upset when switching diets. During the transition period, nutrient composition and price are interpolated between the two phases.
For example, during a 3-day transition:
| Transition day | Old diet | New diet |
|---|---|---|
| Day 1 | 75% | 25% |
| Day 2 | 50% | 50% |
| Day 3 | 25% | 75% |
| Day 4+ | 0% | 100% |
Set transition days to 0 for an immediate switch. Transition days are not available for quantity-based transitions, which always switch immediately.
Section 3: Feeding Schedule
The feeding schedule is a weekly table (up to 35 weeks) that defines the planned daily feed allocation in kilograms per pig per day. The model interpolates between weekly values to create a smooth daily feed curve.
This is the feed you plan to offer. The pig's actual intake may be lower than the planned allocation due to any of the following factors:
- Physiological gut capacity — the pig physically cannot eat more. This is determined by the pig's body weight and the bulk density of the diet (influenced by fibre fractions iCHO and fCHO).
- Heat stress — high ambient temperatures reduce appetite. The pig eats less to reduce metabolic heat production.
- Health challenges — disease or subclinical infections reduce appetite as part of the immune response.
- Sanitary status — the overall hygiene environment modifies baseline appetite and feed efficiency.
If the planned allocation exceeds the pig's voluntary intake capacity, the pig will simply eat less than offered — this is ad libitum behaviour. If the planned allocation is below the pig's capacity, the pig is effectively feed-restricted, which will slow growth but may improve feed conversion ratio and produce a leaner carcass.
In practice, many nutritionists set the feeding schedule high enough that it is never the limiting factor (effectively ad libitum), and let the model's physiological intake calculations determine actual consumption. Alternatively, you can use the feeding schedule to model deliberate feed restriction programs.