Step 4: Health & Climate
Define barn climate conditions and health challenges throughout the production cycle.
Climate and health are among the most significant external factors affecting pig performance. Temperature, humidity, and air speed determine whether pigs are in their comfort zone or under thermal stress, which directly impacts feed intake, growth rate, and feed efficiency. Health challenges further compound these effects by reducing appetite, impairing nutrient utilization, and increasing metabolic costs. This screen lets you model both factors across the entire finishing period.
Barn Type
The first choice on this screen is the barn type. This determines the default climate presets available for humidity and air speed, reflecting the practical differences between controlled and naturally ventilated housing.
Climate-controlled barn
Temperature is actively regulated by mechanical ventilation and heating systems. Because the environment is managed, humidity and air speed tend to be lower and more consistent than in open-sided buildings.
| Parameter | Preset options |
|---|---|
| Humidity | 50%, 60%, 70% |
| Air speed | 0.2, 0.8, 2.0 m/s |
Open-sided barn
Natural ventilation means the barn temperature follows outside conditions more closely. Humidity is typically higher and air movement is less predictable. The presets reflect these more variable conditions.
| Parameter | Preset options |
|---|---|
| Humidity | 55%, 70%, 85% |
| Air speed | 0.1, 0.5, 1.2 m/s |
Environment Blocks
You can define multiple environment blocks, each covering a specific period of the production cycle. This allows you to model seasonal transitions, weekly temperature swings, or any other climate pattern that your animals experience over the course of the finishing period.
| Field | Range | Description |
|---|---|---|
| Start Day / End Day | 1–250 | The period this climate block covers. Blocks should span the full production cycle without gaps. |
| Start Temperature / End Temperature | -10 to 45°C | Temperature at the beginning and end of the period. The model linearly interpolates between these two values day by day, allowing you to model gradual seasonal changes (for example, a barn that starts at 18°C in spring and warms to 28°C by mid-summer). |
| Humidity | 20–100% | Relative humidity. You can choose one of the preset values for your barn type or enter a custom value. High humidity impairs the pig's ability to cool itself through evaporation, effectively raising the perceived temperature. Low humidity enhances evaporative cooling. |
| Air Speed | 0–20 m/s | Air velocity in the barn. Higher air speed creates a wind-chill effect, reducing the effective temperature the pig experiences. You can choose a preset or enter a custom value. |
Effective Temperature
The model does not simply use the raw barn temperature to determine pig comfort. Instead, it calculates an effective temperature that combines three factors:
- Actual temperature — the ambient barn temperature (interpolated from your start and end values).
- Wind chill — higher air speed cools the pig. The model accounts for the cooling effect of air movement.
- Humidity effect — high humidity reduces the pig's ability to lose heat through evaporation, effectively making it feel warmer. Low humidity has the opposite effect.
This effective temperature is what determines whether the pig is comfortable, cold-stressed, or heat-stressed. It is a more accurate representation of what the pig actually experiences than the thermometer reading alone.
Thermal Stress Zones
Every pig has a thermoneutral zone — a range of effective temperatures where it performs optimally, eating and growing at its genetic potential. This zone shifts as the pig grows: younger, lighter pigs prefer warmer conditions, while heavier finishing pigs are comfortable at lower temperatures.
When the effective temperature moves outside the thermoneutral zone, the pig enters one of two stress states:
Heat Stress
When the effective temperature exceeds the upper critical temperature (UCT), pigs reduce their feed intake as a coping mechanism. The heavier the pig, the greater the feed reduction per degree above the UCT. This is because larger pigs have a lower surface-area-to-mass ratio, making it harder for them to dissipate heat. At extreme temperatures far above the UCT, conditions are considered lethal and the simulation will terminate.
Cold Stress
When the effective temperature falls below the lower critical temperature (LCT), pigs need extra energy to maintain body temperature. The model adds additional maintenance energy for each degree below the LCT. This energy is diverted from growth, meaning the pig still eats the same amount but converts feed less efficiently because part of the energy budget goes to thermoregulation rather than protein and lipid deposition.
Lethal conditions
If the effective temperature moves far enough above the upper critical temperature or far enough below the lower critical temperature, the simulation will terminate early because these conditions are considered lethal.
Health Issues
The Health Issues section is optional. It allows you to define one or more health challenges during specific periods of the production cycle. The model does not simulate specific diseases. Instead, it uses a generic "health challenge" that captures the typical phenotypic consequences of any disease: reduced appetite, impaired nutrient utilization, and increased metabolic cost.
| Field | Range | Description |
|---|---|---|
| Starting Day / Ending Day | 1–250 | The period during which the health challenge is active. |
| Severity | Low, Moderate, High, Very high | The intensity of the health challenge. "Low" has the mildest impact; "Very high" represents the most severe impact on performance. |
How Health Challenges Affect the Simulation
A health challenge simultaneously impacts four aspects of pig performance:
- Feed intake — reduced proportionally to severity.
- Lysine digestibility — reduced proportionally to severity.
- Energy digestibility — reduced proportionally to severity.
- Maintenance energy requirement — increased proportionally to severity.
These four effects compound with each other and with the sanitary status setting. A pig that is eating less, digesting nutrients less efficiently, and spending more energy on immune function will grow substantially slower and convert feed much less efficiently than a healthy pig.
Health challenges are modeled as instantaneous in both onset and recovery. When the starting day arrives, the full effect is applied immediately. When the ending day passes, the pig returns to normal performance instantly. The model does not simulate a gradual recovery period.
Practical insight
Even a mild health challenge (severity "Low") can have a measurable impact on FCR because it simultaneously reduces intake, impairs digestion, and increases maintenance costs. If you observe periodic disease challenges on your farm, modeling them here helps you understand their true economic impact.